Window wiring on an old Rover

Could you tell me which wires to connect to a battery in order to run the window up and down on a Rover 825. It was easy on my earlier car because there were only 2 wires going to the motor, but the 825 has 6 wires; the green and slate coloured wires are the up/down circuits, but presumably I need to bridge or connect some other wire or wires to activate the motor at the plug connection in the door?

Naturally I don't want to guess because I could permanently wreck the electrics. I look forward to any gems of wisdom you can send on to me?

Asked on 4 February 2013 by fabu

Answered by Alan Ross
Go to
www.rover-club.net/graphics/manuals/10/Haynes825.p...f which is the complete service and repair manual (plus wiring diagrams) for your car.
You should then be able to resolve your problem
Regards
Similar questions
My 2011 Ford Mondeo boot button isn't working, but will open on the key fob remote. Ford have tried a new micro switch but it isn't that. They say it needs further investigation but that could be an expensive...
I have a 2005 model Honda Civic Sports 1.6 VTEC. I am having to frequently replace the headlight and sidelight bulbs. The frequency is random with no apparent pattern. Sometimes I can go several months...
I have a 57/07 Renault Megane and the driver's electric window works OK but the other three windows are not working.
 

Ask Honest John

Value my car

Save £75 on Warranty using code HJ75

with MotorEasy

Get a warranty quote

Save 10% on GAP Insurance

Use HJ10 to save on an ALA policy

See offer