How do I reset the window ECU on a Peugeot 807?

I have just fitted a replacement window in the rear sliding door of my 2006 Peugeot 807. Now the window does go right to top but then comes down again about four inches. I can get it to the top by "inching it up " with the button, but have been told that the ECU needs resetting so it can learn where top and bottom of its travel is. Can you help?

Asked on 17 August 2014 by loobyralph

Answered by Alan Ross

You could try this

1. Switch the Ignition on.
2.Hold the window button until the window reaches the top and then hold for another 5 seconds.
3.press button to send window down ,when fully down ,again hold for 5 seconds.
Repeat this operation several times,then switch off ignition.
4.Switch ignition on and see if the system is now okay.
Regards

Tags: electrical faults technical issues

Similar questions

Why don't the electrics in my car work?

I bought a 2004 Ford Fiesta, but the air con, radio, 12v socket and heater electrics don't work. Is there something that may be preventing them from working as they're close together in the car?

Why does the battery in my car go flat after a week if I don't drive it?

The battery in my Peugeot 308CC was draining frequently, especially in cold weather. I replaced the battery seven months ago but it still goes flat after a week if the car isn't used. Peugeot dealer says...

My Fiat Grande Punto is having various electric problems - any ideas before I go mad?

My Fiat Grande Punto is having various electric problems, from headlights not working to headlights coming on when I've not got the key in the ignition (solved by turning the heater off). Any ideas before...

Related models