ford ka - engineering equipment for drilling hardened steel

Honest John Back Room » Technical matters
View Threaded
Sun 4 Aug 2019 19:39
ford ka - engineering equipment for drilling hardened steel - aroon

As title says really... what engineering machinery is best for removing a snapped pinch bolt..

Hss drill bits take hours as they are strengthened steel !!!!!

Have a hub assembly with snapped bolt as it was seized. Now need to remove it then replace with a nut and bolt

Reply | Report as offensive | Link
Sun 4 Aug 2019 20:25
ford ka - engineering equipment for drilling hardened steel - elekie&a/c doctor
Heat is your best friend here. Get it hot and punch it through. This is not a regular bolt . Get the correct part and a new nut.
Reply | Report as offensive | Link
Sun 4 Aug 2019 20:54
ford ka - engineering equipment for drilling hardened steel - nailit

I have been informed (from an excellent experienced engineer) that a carbide drill should be able to drill hardened steel. FWIW.

Reply | Report as offensive | Link
Sun 4 Aug 2019 21:21
ford ka - engineering equipment for drilling hardened steel - focussed

For drilling out a high-tensile bolt - It's probably a 10.9 grade if it's a suspension pinch bolt - tough but not super-hard as such, use a HSS cobalt drill bit such as these:-

https://www.axminster.co.uk/axminster-cobalt-hss-drill-bits-ax21744

I've got a set and they are very good.

Reply | Report as offensive | Link
Mon 5 Aug 2019 01:03
ford ka - engineering equipment for drilling hardened steel - CHarkin

A cobalt drill bit will do it no problem. Constructed with a carbide tip like a masonry brill but ground with a cutting edge like a conventional drill. If you have a good enough grinding wheel you can even make one out of an old masonry drill bit.

Drilling it out is a last resort method, are you sure there is no other way?

Reply | Report as offensive | Link
Mon 5 Aug 2019 12:38
ford ka - engineering equipment for drilling hardened steel - focussed

You need a green silicon carbide grinding wheel for carbide.

Reply | Report as offensive | Link