Most recently answered clutches questions
The clutch has started slipping at 34,000 miles on my Peugeot 407 2.0 2009 Sport and was wondering if you could recommend a replacement kit that would last longer that the genuine one.
It would appear...
We have a 23k mileage Agila and are concerned about the strength of the clutch. I think that this is a common problem to this model but is there any modification that can be made. We will speak to the...
The clutch pedal on my Fiesta Zetec 2002 is not working. There is no pressure and it will not engage the gears. There is fluid in the reservoir - I have no idea what the problem is.
Clutch appears to be slipping when carrying heavy loads (ie 7 people in car) and accelerating out of 3rd gear. The car, a Ford S-MAX, is only two years old, 22,000 miles.
Ford dealership giving speech...
I have a Nissan Micra 1998.
I changed the clutch cable a few weeks ago and since then I have a problem moving the gearstick into gear. There is no gear grinding or anything like that, the gear stick just...
I have a low mileage Toyota Aygo (34,500 miles) having covered approximately 6,500 miles each year, bought nearly new from a Toyota dealer 5 years ago.
The clutch plate rivets failed a week ago. I took...
We had a new clutch put in our 2002 Ford Focus 14 months ago. The garage sent us out without putting the gear oil/lubricant in, we drove about 14 miles and then realised and drove the car back as we knew...
My wife has just purchased a FIAT 500. It was registered October 2010 but has only done 40 miles having been an unused, ex BSM car (no dual controls, etc. It really has been unused).
Whilst she loves...
I have a Toyota RAV-4 SWB (3-door) 2.0 litre diesel XT3 D-4D. It has done approx 56,000 miles and it was purchased as a used vehicle from Lookers Toyota, Romford.
However, it now needs a new clutch...
The clutch was recently changed on the car at about 70,000 miles. The new clutch bites very sharply and right on the floor of the pedal travel. I have run the car for few weeks and the garage has bled...

